Roof-mounted and split-system solutions for Brisbane homes.
$0 Call Out Fee
Upfront Project Pricing
Repairs and System Replacements
Appropriately Licensed Hot Water Installers
Solar hot water uses roof collectors to capture heat and transfer it into stored water. A correctly selected system can reduce purchased energy for water heating, while an electric or gas booster helps maintain supply when solar input is insufficient.
We assess existing faults, service suitable systems and plan replacements around household demand, collector location, roof conditions, tank position and booster requirements.
Call us on 1300 453 873
Solar hot water fault diagnosis
Valve, pump and plumbing repairs
Collector and tank replacement planning
Split and roof-mounted systems
Electric and gas booster coordination
New solar hot water installations
Our Happy Customers
With more 5 Star reviews than any other plumbing company.
More locals choose us.
Rating
Solar collectors absorb heat from sunlight. Depending on the system, water or a heat-transfer fluid circulates through the collector circuit and transfers that energy into water stored in an insulated tank. The stored hot water is then supplied to fixtures when needed.
Solar contribution changes with weather, collector orientation, shading, household use and system condition. A booster provides additional heating when the solar energy available is not enough to reach the required water temperature.
| Collector type | How it is arranged |
|---|---|
| Flat-plate collector | An insulated panel with an absorber and waterways beneath a glazed surface. It is a common residential collector format. |
| Evacuated-tube collector | A bank of glass vacuum tubes that captures solar heat and transfers it into the system’s water-heating circuit. |
A split system places the collectors on the roof and the storage tank at ground level or another suitable location. A circulation pump and controls generally move heat between the collectors and tank. This reduces roof load from the storage cylinder but introduces pump and control components that require power and maintenance.
A thermosiphon system places the collector and storage tank together on the roof. Heated water rises naturally into the tank without a circulation pump. The roof structure, access, orientation, mounting and concentrated tank weight all need assessment before installation.
See Queensland’s current hot water system guidance for official licensing and temperature-control information.
Top 9 Reasons Why More Locals Choose Us!
1 Our Gold Medal Service
More and more locals are leaving 5 star reviews on Google explaining their great experiences with Jetset Plumbing.
2 No Call Out Fees
Never had them, never will! You should never pay for travel.
3 Fixed Flat Rates
You always know exactly what the job price is BEFORE we undertake any work.
4 Our Famous Promotions
We have run so many AMAZING promotions over the years and they keep getting better! We are proud to say we have changed some of our customers lives!
5 Fully Licenced Plumbers
This is an obvious one! We do not send apprentices to your job. Only licenced plumbers with years of experience.
6 Charitable Contributions
Jetset Plumbing gives back to our local communities as they are the people who keep us in a job!
7 Quality Workmanship Guarantee
Peace of mind that we will return if something goes wrong.
8 10% Pensioner and Senior Discounts
Because every little bit helps!
9 Jetset Plumbing sponsor World Vision
Proceeds from every job are donated to World Vision for less fortunate people around the world. Locals know that the company they use serves a much larger purpose and is helping make a difference.
The right system depends on the building, available solar resource and how the household uses hot water.
Roof orientation, pitch, shading and usable collector area
Structural suitability and safe installation access
Tank location, drainage and pipe routes
Local weather exposure and manufacturer requirements
Occupancy and daily hot water demand
Electric or gas booster availability
Storage capacity and recovery requirements
Purchase cost, expected energy use and maintenance
Loss of hot water does not always mean the collectors have failed. Problems can occur in the booster, circulation pump, controller, sensors, valves, cylinder, pipework or collector circuit. A visible roof leak, continuous relief discharge, pump noise, error indicator or increasing booster use should be assessed.
Maintenance requirements vary by brand, system type, water quality, roof exposure and booster. Follow the manufacturer’s schedule rather than relying on one interval for every system. Roof access and electrical or gas work are completed by appropriately licensed trades.
We review occupancy, water use, roof conditions, shading, tank locations, pipe routes and available booster energy.
The collector type, storage arrangement, capacity, booster, roof work, plumbing and electrical or gas requirements are documented.
Appropriately licensed trades complete the mounting, plumbing, temperature control, booster connection and required drainage.
The system is filled and purged, controls and booster operation are checked, and accessible connections are inspected for leaks.
Collectors may still contribute some heat in diffuse light, but output is lower. The electric or gas booster provides additional heating when the stored water has not reached the required temperature.
Not necessarily. Pumps, controllers and boosters can use electricity or gas. Actual purchased-energy use depends on weather, system design, household demand, settings and maintenance.
Each can be suitable. Roof space, orientation, climate exposure, system design, price, serviceability and manufacturer requirements should be compared for the property.
Neither arrangement is universally better. Split systems keep the tank off the roof but use pumps and controls; roof-mounted systems concentrate more weight on the roof but can circulate without a pump.
Possible causes include poor solar input, booster failure, pump or controller faults, sensor trouble, valve problems, air in the circuit, scale, a leak or demand above the system’s capacity.
Water may come from a relief valve, pipe joint, cylinder, collector or roof penetration. Because roof leaks and hot pressurised water can be hazardous, arrange an assessment rather than climbing onto the roof.
Use the manufacturer’s maintenance schedule. Arrange earlier attention for leaks, falling performance, unusual pump noise, booster problems, corrosion or visible collector damage.
Sometimes, if compatible approved components are available and the remaining system is in suitable condition. Age, warranty, controls, pipework and overall repair cost should be considered.
Service life varies with product quality, installation, water conditions, roof exposure, usage and maintenance. Individual components can age at different rates.
Cost depends on system type, capacity, roof access, structural and mounting requirements, pipework, booster, electrical or gas work and removal of the old system. We provide an upfront project price.
Yes. We service Brisbane City and surrounding northside, southside, eastern and western suburbs, subject to system type, roof access and availability.
Need Help?
Call our team - 24/7.
Our Offices
49 Montpelier Rd
Bowen Hills, QLD 4006
14/475 Scottsdale Drive
Varsity Lakes QLD 4227
Suite 10&11, 81 Brisbane St
Ipswich, QLD 4305
Phone: 1300 453 873
Email: customerservice@jetsetplumbing.com.au
Email: Email
Opening Hours
Profiles & Reviews
Industry Memberships
