New water lines, replacement connections and refrigerator plumbing repairs across Brisbane.
$0 Call Out Fee
Upfront Project Pricing
Licensed and Insured Plumbers
Connections Tested Before Completion
A plumbed refrigerator needs more than a loose hose run from the nearest tap. The water point, isolation valve, tubing route and appliance connection must suit the fridge and remain accessible for servicing.
We install water supplies for refrigerators with chilled-water dispensers and automatic ice makers, connect replacement appliances and investigate leaks around existing fridge plumbing.
Call us on 1300 453 873
New refrigerator water lines
Ice maker and water dispenser connections
Accessible isolation valve installation
Replacement refrigerator connections
Leaking fridge water line repairs
Plumbing for kitchen renovations
Our Happy Customers
With more 5 Star reviews than any other plumbing company.
More locals choose us.
Rating
Modern refrigerators can supply filtered drinking water and make ice automatically, but these features need a reliable cold-water connection. If the fridge cavity has no suitable point, our plumbers assess the nearby pipework and plan a route that avoids heat, sharp cabinet edges, crushing and unnecessary exposed tubing.
The source may be near the kitchen sink, behind adjoining cabinetry or in another accessible location. The best route depends on the kitchen layout, wall and floor construction, appliance instructions and the condition of the existing plumbing.
A refrigerator connection should allow the appliance to be isolated without shutting off water to the entire home. It also needs a compatible connection, a protected tube or hose route and enough movement for the refrigerator to be pulled forward without stretching or kinking the line.
| Connection component | Why it matters |
|---|---|
| Cold-water supply | Provides the water required by the dispenser and automatic ice maker. |
| Isolation valve | Allows the refrigerator supply to be turned off for servicing, filter work or appliance replacement. |
| Approved tubing and fittings | Provides a compatible, secure route from the water point to the refrigerator connection. |
| Backflow protection | Protects the drinking-water supply where required by the appliance and plumbing arrangement. |
| Leak and operation testing | Checks accessible joints under pressure and confirms water reaches the appliance. |
An existing water point does not automatically mean the new fridge can be connected without changes. We inspect the isolation valve and accessible fittings, compare the connection with the new appliance requirements and check whether the hose or tubing has deteriorated, kinked or been damaged behind the old refrigerator.
After connection, the line should be flushed as directed, the fittings checked for leaks and the appliance moved into position without trapping the supply tube. The refrigerator’s filter and ice-making system may also need priming before normal operation begins.
A renovation is the ideal time to plan the refrigerator water point. The valve should be accessible after the cabinetry and appliance are installed, while remaining clear of drawers, shelves and other services. Pipework and penetrations should be completed before finishes make access difficult.
We coordinate the agreed plumbing with the kitchen layout. Cabinet alterations are completed by the cabinetmaker, and any new power point or electrical work must be completed by a licensed electrician.
Top 9 Reasons Why More Locals Choose Us!
1 Our Gold Medal Service
More and more locals are leaving 5 star reviews on Google explaining their great experiences with Jetset Plumbing.
2 No Call Out Fees
Never had them, never will! You should never pay for travel.
3 Fixed Flat Rates
You always know exactly what the job price is BEFORE we undertake any work.
4 Our Famous Promotions
We have run so many AMAZING promotions over the years and they keep getting better! We are proud to say we have changed some of our customers lives!
5 Fully Licenced Plumbers
This is an obvious one! We do not send apprentices to your job. Only licenced plumbers with years of experience.
6 Charitable Contributions
Jetset Plumbing gives back to our local communities as they are the people who keep us in a job!
7 Quality Workmanship Guarantee
Peace of mind that we will return if something goes wrong.
8 10% Pensioner and Senior Discounts
Because every little bit helps!
9 Jetset Plumbing sponsor World Vision
Proceeds from every job are donated to World Vision for less fortunate people around the world. Locals know that the company they use serves a much larger purpose and is helping make a difference.
Water around a refrigerator should be investigated promptly because a slow leak can damage cabinetry, flooring and adjoining rooms.
A loose fitting, split tube, damaged hose, leaking isolation valve or connection disturbed while moving the appliance can release water behind the cabinet.
A closed valve, kinked line, overdue filter, unsuitable pressure or obstruction can reduce flow. Appliance faults may also affect dispensing.
Check that the water valve is open and the line is not trapped. Filter, inlet-valve, freezer-temperature or ice-maker faults may require appliance service.
An inaccessible or seized valve makes it difficult to isolate the fridge quickly. A plumber can assess a more serviceable arrangement.
Excess tubing can become trapped when the refrigerator is pushed back, restricting flow and placing stress on connections.
Pulling a connected fridge forward can strain short tubing or loosen a fitting. Turn off the dedicated valve if water appears.
We review the refrigerator connection requirements, cavity dimensions, existing water points and access around the kitchen.
For a new installation, we identify a suitable cold-water source and determine the pipe, valve and tubing route required for the property.
The agreed water point, isolation valve and connection are installed, or the replacement refrigerator is connected to suitable existing plumbing.
We flush where required, inspect accessible joints under pressure and confirm the tubing remains protected as the fridge is moved into position.
No. A refrigerator only needs a water connection when it has a plumbed drinking-water dispenser, automatic ice maker or another feature requiring a mains water supply. Some models use refillable internal tanks instead.
Usually, subject to access and the available cold-water pipework. We inspect the kitchen and provide an upfront scope and price for a suitable route.
It may be possible, but the final arrangement depends on access, pipe condition, the cabinetry route and the refrigerator instructions. The new connection should have a suitable isolation valve.
Most domestic water-and-ice refrigerators need a cold-water supply but no external waste connection. Always confirm the requirements for the specific model.
A dedicated accessible valve is important because it allows the refrigerator supply to be shut off for maintenance or replacement without interrupting the rest of the kitchen water supply.
Yes, provided the valve, connection, pressure and tubing arrangement are suitable for the appliance. Any worn, seized, damaged or incompatible components should be addressed first.
Possible causes include a loose fitting, split tube, damaged hose, leaking valve, filter connection or an internal appliance fault. Turn off the fridge water valve if safe and arrange an assessment.
We handle the household water supply, isolation valve and external connection. Internal pumps, solenoids, dispensers, ice-maker mechanisms and refrigeration faults generally require an appliance technician.
It can be pulled forward carefully when enough tubing has been provided, but the line must not be stretched, twisted or kinked. Isolate and disconnect it before moving the appliance further.
A compatible existing point may allow a straightforward connection. Installing a new line takes longer and depends on pipe access, cabinetry, the route and any valve or fitting upgrades.
Yes. We service Brisbane City and surrounding northside, southside, eastern and western suburbs, subject to access and availability.
Need Help?
Call our team - 24/7.
Our Offices
49 Montpelier Rd
Bowen Hills, QLD 4006
14/475 Scottsdale Drive
Varsity Lakes QLD 4227
Suite 10&11, 81 Brisbane St
Ipswich, QLD 4305
Phone: 1300 453 873
Email: customerservice@jetsetplumbing.com.au
Email: Email
Opening Hours
Profiles & Reviews
Industry Memberships
